Change urls to new open-mesh third level domains
Commit Message
Most of the urls are redirected by an 301 Moved permanently but some are
not at the moment. It should not hurt to have the new versions of them
everywhere.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
---
batman-adv-userspace/Makefile | 2 +-
batman-adv-userspace/man/batmand-adv.8 | 2 +-
batman-experimental/INSTALL | 4 ++--
batman-experimental/doc/bmx.tex | 2 +-
batman/CHANGELOG | 2 +-
batman/INSTALL | 4 ++--
batman/Makefile | 2 +-
battool/Makefile | 2 +-
vis/Makefile | 2 +-
9 files changed, 11 insertions(+), 11 deletions(-)
Comments
Hi Sven,
> Most of the urls are redirected by an 301 Moved permanently but some are
> not at the moment. It should not hurt to have the new versions of them
> everywhere.
thanks for your patch. Before I applied it I made some minor modifications.
Some URLs were still not 100% correct and thus redirected, e.g.
http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
instead of:
http://www.open-mesh.net/log/$(LOG_BRANCH)/
Regards,
Marek
On Wednesday 14 January 2009 16:41:27 Marek Lindner wrote:
> Hi Sven,
>
> > Most of the urls are redirected by an 301 Moved permanently but some are
> > not at the moment. It should not hurt to have the new versions of them
> > everywhere.
>
> thanks for your patch. Before I applied it I made some minor modifications.
> Some URLs were still not 100% correct and thus redirected, e.g.
> http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
> instead of:
> http://www.open-mesh.net/log/$(LOG_BRANCH)/
Ah, ok. Should have double checked it.
Dont forget the other patch with the merge conflict marker :)
Regards,
Sven
On Wednesday 14 January 2009 17:22:49 Sven Eckelmann wrote:
> Dont forget the other patch with the merge conflict marker :)
Simon was faster than me. He already committed it.
Regards,
Marek
@@ -71,7 +71,7 @@ sources:
for i in $$( find . | grep $(SRC_FILES) | grep -v "\.svn" ); do [ -d $$i ] && mkdir -p $(FILE_NAME)/$$i ; [ -f $$i ] && cp -Lvp $$i $(FILE_NAME)/$$i ;done
- $(BUILD_PATH)/wget --no-check-certificate -O changelog.html https://dev.open-mesh.net/batman/log/$(LOG_BRANCH)/
+ $(BUILD_PATH)/wget -O changelog.html http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
html2text -o changelog.txt -nobs -ascii changelog.html
awk '/View revision/,/10\/01\/06 20:23:03/' changelog.txt > $(FILE_NAME)/CHANGELOG
@@ -24,7 +24,7 @@ batmand-adv \- better approach to mobile ad-hoc networking, Layer 2 version batm
.br
.SH DESCRIPTION
.B B.A.T.M.A.N
-means better approach to mobile ad-hoc networking, this is a new routing protocol for multi-hop ad-hoc mesh networks. Go to http://open-mesh.net/batman to get more information.
+means better approach to mobile ad-hoc networking, this is a new routing protocol for multi-hop ad-hoc mesh networks. Go to http://www.open-mesh.net/ to get more information.
.PP
Unlike batmand, batmand-adv operates on Layer 2, using Ethernet frames to encapsulate protocol and payload data and not UDP/IP. A batmand-adv mesh network is acting like a switch, and after starting the daemon you'll get a virtual network interface "bat0" which can be used like a usual LAN interface. Communication is tunneled directly to other batmand-adv participants.
.PP
@@ -30,7 +30,7 @@ downloads.open-mesh.net is likely to offer precompiled packages
for your system.
Download and compile the latest stable sources from the download
-section http://open-mesh.net/batman/downloads by executing eg.:
+section http://www.open-mesh.net/wiki/Download by executing eg.:
$ wget http://downloads.open-mesh.net/batman/stable/sources/batmand_0.2-current_sources.tgz
$ tar xzvf batmand_0.2-current_sources.tgz
@@ -94,7 +94,7 @@ batman for one (or several) interfaces and specify the netmask and IP address
as well as other optionally parameters.
Alternatively you can get the latest stable release (as well as development)
-versions from http://open-mesh.net/batman/downoads/
+versions from http://www.open-mesh.net/wiki/Download
For example to install batmand-0.2 on a freifunk WRT do:
@@ -1956,7 +1956,7 @@ Wesley Tsai (wesleyboy-at-gmail.com)
\bibitem{svn-batmand-install}
{batmand subversion repository},\\
-{https://dev.open-mesh.net/svn/batman/trunk/batman/INSTALL}
+{http://downloads.open-mesh.net/svn/batman/trunk/batman/INSTALL}
\bibitem{bmx-source-url}
{batmand-experimental download URL},\\
@@ -1,3 +1,3 @@
For a reasonable up-to-date CHANGELOG visit:
-https://dev.open-mesh.net/batman/log/trunk
+https://www.open-mesh.net/batman/log/trunk
@@ -32,7 +32,7 @@ downloads.open-mesh.net likely offers precompiled packages
for your system.
Download and compile the latest stable sources from the download
-section http://open-mesh.net/batman/downloads by executing eg.:
+section http://www.open-mesh.net/wiki/Download by executing eg.:
$ wget http://downloads.open-mesh.net/batman/releases/batman-0.3.1/batman-0.3.1.tar.gz
$ tar xzvf batman-0.3.1.tar.gz
@@ -94,7 +94,7 @@ batman for one (or several) interfaces and specify the netmask and IP address
as well as other optionally parameters.
Alternatively you can get the latest stable release (as well as development)
-versions from http://open-mesh.net/batman/downoads/
+versions from http://www.open-mesh.net/wiki/Download
For example to install batmand-0.2 on a freifunk WRT do:
@@ -89,7 +89,7 @@ sources:
for i in $$( find . | grep $(SRC_FILES) | grep -v "\.svn" ); do [ -d $$i ] && mkdir -p $(FILE_NAME)/$$i ; [ -f $$i ] && cp -Lvp $$i $(FILE_NAME)/$$i ;done
- wget --no-check-certificate -O changelog.html https://dev.open-mesh.net/batman/log/$(LOG_BRANCH)/
+ wget -O changelog.html http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
html2text -o changelog.txt -nobs -ascii changelog.html
awk '/View revision/,/10\/01\/06 20:23:03/' changelog.txt > $(FILE_NAME)/CHANGELOG
@@ -81,7 +81,7 @@ sources:
for i in $$( find . | grep $(SRC_FILES) | grep -v "\.svn" ); do [ -d $$i ] && mkdir -p $(FILE_NAME)/$$i ; [ -f $$i ] && cp -Lvp $$i $(FILE_NAME)/$$i ;done
- $(BUILD_PATH)/wget --no-check-certificate -O changelog.html https://dev.open-mesh.net/batman/log/$(LOG_BRANCH)/
+ $(BUILD_PATH)/wget -O changelog.html http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
html2text -o changelog.txt -nobs -ascii changelog.html
awk '/View revision/,/10\/01\/06 20:23:03/' changelog.txt > $(FILE_NAME)/CHANGELOG
@@ -100,7 +100,7 @@ sources:
for i in $$( find . | grep $(SRC_FILES) | grep -v "\.svn" ); do [ -d $$i ] && mkdir -p $(FILE_NAME)/$$i ; [ -f $$i ] && cp -Lvp $$i $(FILE_NAME)/$$i ;done
- $(BUILD_PATH)/wget --no-check-certificate -O changelog.html https://dev.open-mesh.net/batman/log/$(LOG_BRANCH)/
+ $(BUILD_PATH)/wget -O changelog.html http://www.open-mesh.net/batman/log/$(LOG_BRANCH)/
html2text -o changelog.txt -nobs -ascii changelog.html
awk '/View revision/,/10\/01\/06 20:23:03/' changelog.txt > $(FILE_NAME)/CHANGELOG