@@ -170,6 +170,27 @@ static int __batadv_interface_kill_vid(struct net_device *dev, __be16 proto,\
#endif /* < KERNEL_VERSION(3, 10, 0) */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 15, 0)
+
+/* the expected behaviour of this function is to return 0 on success, therefore
+ * it is possible to define it as 1 so that batman-adv thinks like something
+ * went wrong. It will then decide what to do.
+ */
+#define cfg80211_get_station(_a, _b, _c) (1)
+/* the following define substitute the expected_throughput field with a random
+ * one existing in the station_info struct. It can be random because due to the
+ * define above it will never be used. We need it only to make the code compile
+ */
+#define expected_throughput filled
+
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+
+#warning cfg80211 based throughput metric is only supported with Linux 3.15+
+
+#endif
+
+#endif /* < KERNEL_VERSION(3, 15, 0) */
+
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
#define IFF_NO_QUEUE 0; dev->tx_queue_len = 0
@@ -21,6 +21,7 @@
#include <linux/atomic.h>
#include <linux/cache.h>
#include <linux/init.h>
+#include <linux/workqueue.h>
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
@@ -65,6 +66,8 @@ static void
batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
{
ewma_throughput_init(&hardif_neigh->bat_v.throughput);
+ INIT_WORK(&hardif_neigh->bat_v.metric_work,
+ batadv_v_elp_throughput_metric_update);
}
static void batadv_v_ogm_schedule(struct batadv_hard_iface *hard_iface)
@@ -22,6 +22,7 @@
#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/fs.h>
#include <linux/if_ether.h>
#include <linux/jiffies.h>
@@ -30,11 +31,13 @@
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
+#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
+#include <net/cfg80211.h>
#include "bat_algo.h"
#include "bat_v_ogm.h"
@@ -60,6 +63,105 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
}
/**
+ * batadv_v_elp_get_throughput - get the throughput towards a neighbour
+ * @neigh: the neighbour for which the throughput has to be obtained
+ *
+ * Return: the throughput towards the given neighbour.
+ */
+static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
+{
+ struct batadv_hard_iface *hard_iface = neigh->if_incoming;
+ struct station_info sinfo;
+ struct ethtool_cmd cmd;
+ u32 throughput;
+ int ret;
+
+ /* if the user specified a customised value for this interface, then
+ * return it directly
+ */
+ throughput = atomic_read(&hard_iface->bat_v.throughput_override);
+ if (throughput != 0)
+ return throughput;
+
+ /* if this is a wireless device, then ask its throughput through
+ * cfg80211 API
+ */
+ if (batadv_is_wifi_netdev(hard_iface->net_dev)) {
+ if (hard_iface->net_dev->ieee80211_ptr) {
+ ret = cfg80211_get_station(hard_iface->net_dev,
+ neigh->addr, &sinfo);
+ if (ret == -ENOENT) {
+ /* Node is not associated anymore! It would be
+ * possible to delete this neighbor. For now set
+ * the throughput metric to 0.
+ */
+ return 0;
+ }
+ if (!ret)
+ return sinfo.expected_throughput / 10;
+ }
+
+ /* unsupported WiFi driver version */
+ goto default_throughput;
+ }
+
+ /* if not a wifi interface, check if this device provides data via
+ * ethtool (e.g. an Ethernet adapter)
+ */
+ memset(&cmd, 0, sizeof(cmd));
+ rtnl_lock();
+ ret = __ethtool_get_settings(hard_iface->net_dev, &cmd);
+ rtnl_unlock();
+ if (ret == 0) {
+ /* link characteristics might change over time */
+ if (cmd.duplex == DUPLEX_FULL)
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+ else
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
+ throughput = ethtool_cmd_speed(&cmd);
+ if (throughput && throughput != SPEED_UNKNOWN)
+ return throughput * 10;
+ }
+
+default_throughput:
+ if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
+ batadv_info(hard_iface->soft_iface,
+ "WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %d kbit/s. Consider overriding the throughput manually or checking your driver.\n",
+ hard_iface->net_dev->name,
+ BATADV_THROUGHPUT_DEFAULT_VALUE / 10);
+ hard_iface->bat_v.flags |= BATADV_WARNING_DEFAULT;
+ }
+
+ /* if none of the above cases apply, return the base_throughput */
+ return BATADV_THROUGHPUT_DEFAULT_VALUE;
+}
+
+/**
+ * batadv_v_elp_throughput_metric_update - worker updating the throughput metric
+ * of a single hop neighbour
+ * @work: the work queue item
+ */
+void batadv_v_elp_throughput_metric_update(struct work_struct *work)
+{
+ struct batadv_hardif_neigh_node_bat_v *neigh_bat_v;
+ struct batadv_hardif_neigh_node *neigh;
+
+ neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v,
+ metric_work);
+ neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node,
+ bat_v);
+
+ ewma_throughput_add(&neigh->bat_v.throughput,
+ batadv_v_elp_get_throughput(neigh));
+
+ /* decrement refcounter to balance increment performed before scheduling
+ * this task
+ */
+ batadv_hardif_neigh_free_ref(neigh);
+}
+
+/**
* batadv_v_elp_periodic_work - ELP periodic task per interface
* @work: work queue item
*
@@ -67,6 +169,7 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
*/
static void batadv_v_elp_periodic_work(struct work_struct *work)
{
+ struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
struct batadv_hard_iface_bat_v *bat_v;
struct batadv_elp_packet *elp_packet;
@@ -108,6 +211,31 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
atomic_inc(&hard_iface->bat_v.elp_seqno);
+ /* The throughput metric is updated on each sent packet. This way, if a
+ * node is dead and no longer sends packets, batman-adv is still able to
+ * react timely to its death.
+ *
+ * The throughput metric is updated by following these steps:
+ * 1) if the hard_iface is wifi => send a number of unicast ELPs for
+ * probing/sampling to each neighbor
+ * 2) update the throughput metric value of each neighbor (note that the
+ * value retrieved in this step might be 100ms old because the
+ * probing packets at point 1) could still be in the HW queue)
+ */
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(hardif_neigh, &hard_iface->neigh_list, list) {
+ if (!atomic_inc_not_zero(&hardif_neigh->refcount))
+ continue;
+
+ /* Reading the estimated throughput from cfg80211 is a task that
+ * may sleep and that is not allowed in an rcu protected
+ * context. Therefore schedule a task for that.
+ */
+ queue_work(batadv_event_workqueue,
+ &hardif_neigh->bat_v.metric_work);
+ }
+ rcu_read_unlock();
+
restart_timer:
batadv_v_elp_start_timer(hard_iface);
out:
@@ -146,6 +274,15 @@ int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface)
atomic_set(&hard_iface->bat_v.elp_seqno, random_seqno);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
+ /* assume full-duplex by default */
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+
+ /* warn the user (again) if there is no throughput data is available */
+ hard_iface->bat_v.flags &= ~BATADV_WARNING_DEFAULT;
+
+ if (batadv_is_wifi_netdev(hard_iface->net_dev))
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
INIT_DELAYED_WORK(&hard_iface->bat_v.elp_wq,
batadv_v_elp_periodic_work);
batadv_v_elp_start_timer(hard_iface);
@@ -21,11 +21,13 @@
#define _NET_BATMAN_ADV_BAT_V_ELP_H_
struct sk_buff;
+struct work_struct;
int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface);
void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface);
void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface);
int batadv_v_elp_packet_recv(struct sk_buff *skb,
struct batadv_hard_iface *if_incoming);
+void batadv_v_elp_throughput_metric_update(struct work_struct *work);
#endif /* _NET_BATMAN_ADV_BAT_V_ELP_H_ */
@@ -339,7 +339,7 @@ static u32 batadv_v_forward_penalty(struct batadv_priv *bat_priv,
*/
if ((throughput > 10) &&
(if_incoming == if_outgoing) &&
- (batadv_is_wifi_netdev(if_incoming->net_dev)))
+ !(if_incoming->bat_v.flags & BATADV_FULL_DUPLEX))
return throughput / 2;
/* hop penalty of 255 equals 100% */
@@ -62,6 +62,7 @@
#define BATADV_TQ_TOTAL_BIDRECT_LIMIT 1
/* B.A.T.M.A.N. V */
+#define BATADV_THROUGHPUT_DEFAULT_VALUE 10
#define BATADV_ELP_MAX_AGE 64
#define BATADV_OGM_MAX_ORIGDIFF 5
#define BATADV_OGM_MAX_AGE 64
@@ -86,12 +86,25 @@ struct batadv_hard_iface_bat_iv {
};
/**
+ * enum batadv_v_hard_iface_flags - interface flags useful to B.A.T.M.A.N. V
+ * @BATADV_FULL_DUPLEX: tells if the connection over this link is full-duplex
+ * @BATADV_WARNING_DEFAULT: tells whether we have warned the user that no
+ * throughput data is available for this interface and that default values are
+ * assumed.
+ */
+enum batadv_v_hard_iface_flags {
+ BATADV_FULL_DUPLEX = BIT(0),
+ BATADV_WARNING_DEFAULT = BIT(1),
+};
+
+/**
* struct batadv_hard_iface_bat_v - per hard-interface B.A.T.M.A.N. V data
* @elp_interval: time interval between two ELP transmissions
* @elp_seqno: current ELP sequence number
* @elp_skb: base skb containing the ELP message to send
* @elp_wq: workqueue used to schedule ELP transmissions
* @throughput_override: throughput override to disable link auto-detection
+ * @flags: interface specific flags
*/
struct batadv_hard_iface_bat_v {
atomic_t elp_interval;
@@ -99,6 +112,7 @@ struct batadv_hard_iface_bat_v {
struct sk_buff *elp_skb;
struct delayed_work elp_wq;
atomic_t throughput_override;
+ u8 flags;
};
/**
@@ -375,12 +389,14 @@ DECLARE_EWMA(throughput, 1024, 8)
* @elp_interval: time interval between two ELP transmissions
* @elp_latest_seqno: latest and best known ELP sequence number
* @last_unicast_tx: when the last unicast packet has been sent to this neighbor
+ * @metric_work: work queue callback item for metric update
*/
struct batadv_hardif_neigh_node_bat_v {
struct ewma_throughput throughput;
u32 elp_interval;
u32 elp_latest_seqno;
unsigned long last_unicast_tx;
+ struct work_struct metric_work;
};
/**