[14/15] batman-adv: Merge batadv_v_ogm_orig_update into batadv_v_ogm_route_update
Commit Message
From: Simon Wunderlich <simon@open-mesh.com>
Since batadv_v_ogm_orig_update() was only called from one place and the
calling function became very short, merge these two functions together.
This should also reflect the protocol description of B.A.T.M.A.N. V
better.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
---
net/batman-adv/bat_v_ogm.c | 117 ++++++++++++++++++---------------------------
1 file changed, 46 insertions(+), 71 deletions(-)
@@ -234,73 +234,6 @@ void batadv_v_ogm_primary_iface_set(struct batadv_hard_iface *primary_iface)
}
/**
- * batadv_v_ogm_orig_update - update the originator status based on the received
- * OGM
- * @bat_priv: the bat priv with all the soft interface information
- * @orig_node: the originator to update
- * @neigh_node: the neighbour the OGM has been received from (to update)
- * @ogm2: the received OGM
- * @if_outgoing: the interface where this OGM is going to be forwarded through
- */
-static void
-batadv_v_ogm_orig_update(struct batadv_priv *bat_priv,
- struct batadv_orig_node *orig_node,
- struct batadv_neigh_node *neigh_node,
- const struct batadv_ogm2_packet *ogm2,
- struct batadv_hard_iface *if_outgoing)
-{
- struct batadv_neigh_ifinfo *router_ifinfo = NULL, *neigh_ifinfo = NULL;
- struct batadv_neigh_node *router = NULL;
- s32 neigh_seq_diff;
- u32 neigh_last_seqno;
- u32 router_last_seqno;
- u32 router_throughput, neigh_throughput;
-
- batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
- "Searching and updating originator entry of received packet\n");
-
- /* if this neighbor already is our next hop there is nothing
- * to change
- */
- router = batadv_orig_router_get(orig_node, if_outgoing);
- if (router == neigh_node)
- goto out;
-
- /* don't consider neighbours with worse throughput.
- * also switch route if this seqno is BATADV_V_MAX_ORIGDIFF newer than
- * the last received seqno from our best next hop.
- */
- if (router) {
- router_ifinfo = batadv_neigh_ifinfo_get(router, if_outgoing);
- neigh_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
-
- /* if these are not allocated, something is wrong. */
- if (!router_ifinfo || !neigh_ifinfo)
- goto out;
-
- neigh_last_seqno = neigh_ifinfo->bat_v.last_seqno;
- router_last_seqno = router_ifinfo->bat_v.last_seqno;
- neigh_seq_diff = neigh_last_seqno - router_last_seqno;
- router_throughput = router_ifinfo->bat_v.throughput;
- neigh_throughput = neigh_ifinfo->bat_v.throughput;
-
- if ((neigh_seq_diff < BATADV_OGM_MAX_ORIGDIFF) &&
- (router_throughput >= neigh_throughput))
- goto out;
- }
-
- batadv_update_route(bat_priv, orig_node, if_outgoing, neigh_node);
-
-out:
- if (router_ifinfo)
- batadv_neigh_ifinfo_put(router_ifinfo);
- if (neigh_ifinfo)
- batadv_neigh_ifinfo_put(neigh_ifinfo);
- if (router)
- batadv_neigh_node_put(router);
-}
-
-/**
* batadv_v_forward_penalty - apply a penalty to the throughput metric forwarded
* with B.A.T.M.A.N. V OGMs
* @bat_priv: the bat priv with all the soft interface information
@@ -546,6 +479,11 @@ static bool batadv_v_ogm_route_update(struct batadv_priv *bat_priv,
struct batadv_neigh_node *router = NULL;
struct batadv_orig_node *orig_neigh_node = NULL;
struct batadv_neigh_node *orig_neigh_router = NULL;
+ struct batadv_neigh_ifinfo *router_ifinfo = NULL, *neigh_ifinfo = NULL;
+ u32 router_throughput, neigh_throughput;
+ u32 router_last_seqno;
+ u32 neigh_last_seqno;
+ s32 neigh_seq_diff;
bool forward = false;
orig_neigh_node = batadv_v_ogm_orig_get(bat_priv, ethhdr->h_source);
@@ -565,11 +503,44 @@ static bool batadv_v_ogm_route_update(struct batadv_priv *bat_priv,
goto out;
}
- /* Update routes, and check if the OGM is from the best next hop */
- batadv_v_ogm_orig_update(bat_priv, orig_node, neigh_node, ogm2,
- if_outgoing);
-
+ /* Mark the OGM to be considered for forwarding, and update routes
+ * if needed.
+ */
forward = true;
+
+ batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
+ "Searching and updating originator entry of received packet\n");
+
+ /* if this neighbor already is our next hop there is nothing
+ * to change
+ */
+ if (router == neigh_node)
+ goto out;
+
+ /* don't consider neighbours with worse throughput.
+ * also switch route if this seqno is BATADV_V_MAX_ORIGDIFF newer than
+ * the last received seqno from our best next hop.
+ */
+ if (router) {
+ router_ifinfo = batadv_neigh_ifinfo_get(router, if_outgoing);
+ neigh_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
+
+ /* if these are not allocated, something is wrong. */
+ if (!router_ifinfo || !neigh_ifinfo)
+ goto out;
+
+ neigh_last_seqno = neigh_ifinfo->bat_v.last_seqno;
+ router_last_seqno = router_ifinfo->bat_v.last_seqno;
+ neigh_seq_diff = neigh_last_seqno - router_last_seqno;
+ router_throughput = router_ifinfo->bat_v.throughput;
+ neigh_throughput = neigh_ifinfo->bat_v.throughput;
+
+ if ((neigh_seq_diff < BATADV_OGM_MAX_ORIGDIFF) &&
+ (router_throughput >= neigh_throughput))
+ goto out;
+ }
+
+ batadv_update_route(bat_priv, orig_node, if_outgoing, neigh_node);
out:
if (router)
batadv_neigh_node_put(router);
@@ -577,6 +548,10 @@ out:
batadv_neigh_node_put(orig_neigh_router);
if (orig_neigh_node)
batadv_orig_node_put(orig_neigh_node);
+ if (router_ifinfo)
+ batadv_neigh_ifinfo_put(router_ifinfo);
+ if (neigh_ifinfo)
+ batadv_neigh_ifinfo_put(neigh_ifinfo);
return forward;
}