[v3,maint] batman-adv: set up network coding packet handlers during module init
Commit Message
batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).
The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).
Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
v3: moved things around as Marek suggested
main.c | 5 +++--
network-coding.c | 28 ++++++++++++++++++----------
network-coding.h | 14 ++++++++++----
3 files changed, 31 insertions(+), 16 deletions(-)
Comments
On Friday 27 September 2013 18:03:39 Matthias Schiffer wrote:
> batman-adv saves its table of packet handlers as a global state, so handlers
> must be set up only once (and setting them up a second time will fail).
>
> The recently-added network coding support tries to set up its handler each
> time a new softif is registered, which obviously fails when more that one
> softif is used (and in consequence, the softif creation fails).
>
> Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
> only once) and batadv_nc_mesh_init (which is called for each softif); in
> addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
> consistent.
>
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> ---
> v3: moved things around as Marek suggested
>
> main.c | 5 +++--
> network-coding.c | 28 ++++++++++++++++++----------
> network-coding.h | 14 ++++++++++----
> 3 files changed, 31 insertions(+), 16 deletions(-)
Applied in revision 586cf84.
Thanks,
Marek
@@ -61,6 +61,7 @@ static int __init batadv_init(void)
batadv_recv_handler_init();
batadv_iv_init();
+ batadv_nc_init();
batadv_event_workqueue = create_singlethread_workqueue("bat_events");
@@ -138,7 +139,7 @@ int batadv_mesh_init(struct net_device *soft_iface)
if (ret < 0)
goto err;
- ret = batadv_nc_init(bat_priv);
+ ret = batadv_nc_mesh_init(bat_priv);
if (ret < 0)
goto err;
@@ -163,7 +164,7 @@ void batadv_mesh_free(struct net_device *soft_iface)
batadv_vis_quit(bat_priv);
batadv_gw_node_purge(bat_priv);
- batadv_nc_free(bat_priv);
+ batadv_nc_mesh_free(bat_priv);
batadv_dat_free(bat_priv);
batadv_bla_free(bat_priv);
@@ -35,6 +35,20 @@ static int batadv_nc_recv_coded_packet(struct sk_buff *skb,
struct batadv_hard_iface *recv_if);
/**
+ * batadv_nc_init - one-time initialization for network coding
+ */
+int __init batadv_nc_init(void)
+{
+ int ret;
+
+ /* Register our packet type */
+ ret = batadv_recv_handler_register(BATADV_CODED,
+ batadv_nc_recv_coded_packet);
+
+ return ret;
+}
+
+/**
* batadv_nc_start_timer - initialise the nc periodic worker
* @bat_priv: the bat priv with all the soft interface information
*/
@@ -45,10 +59,10 @@ static void batadv_nc_start_timer(struct batadv_priv *bat_priv)
}
/**
- * batadv_nc_init - initialise coding hash table and start house keeping
+ * batadv_nc_mesh_init - initialise coding hash table and start house keeping
* @bat_priv: the bat priv with all the soft interface information
*/
-int batadv_nc_init(struct batadv_priv *bat_priv)
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
{
bat_priv->nc.timestamp_fwd_flush = jiffies;
bat_priv->nc.timestamp_sniffed_purge = jiffies;
@@ -70,11 +84,6 @@ int batadv_nc_init(struct batadv_priv *bat_priv)
batadv_hash_set_lock_class(bat_priv->nc.coding_hash,
&batadv_nc_decoding_hash_lock_class_key);
- /* Register our packet type */
- if (batadv_recv_handler_register(BATADV_CODED,
- batadv_nc_recv_coded_packet) < 0)
- goto err;
-
INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
batadv_nc_start_timer(bat_priv);
@@ -1721,12 +1730,11 @@ free_nc_packet:
}
/**
- * batadv_nc_free - clean up network coding memory
+ * batadv_nc_mesh_free - clean up network coding memory
* @bat_priv: the bat priv with all the soft interface information
*/
-void batadv_nc_free(struct batadv_priv *bat_priv)
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
{
- batadv_recv_handler_unregister(BATADV_CODED);
cancel_delayed_work_sync(&bat_priv->nc.work);
batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL);
@@ -22,8 +22,9 @@
#ifdef CONFIG_BATMAN_ADV_NC
-int batadv_nc_init(struct batadv_priv *bat_priv);
-void batadv_nc_free(struct batadv_priv *bat_priv);
+int batadv_nc_init(void);
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv);
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv);
void batadv_nc_update_nc_node(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig_node,
struct batadv_orig_node *orig_neigh_node,
@@ -46,12 +47,17 @@ int batadv_nc_init_debugfs(struct batadv_priv *bat_priv);
#else /* ifdef CONFIG_BATMAN_ADV_NC */
-static inline int batadv_nc_init(struct batadv_priv *bat_priv)
+static inline int batadv_nc_init(void)
{
return 0;
}
-static inline void batadv_nc_free(struct batadv_priv *bat_priv)
+static inline int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
+{
+ return 0;
+}
+
+static inline void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
{
return;
}