[v4,7/7] batman-adv: add Distributed ARP Table compile option
Commit Message
This patch makes it possible possible to decide whether to compile DAT or not.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
---
Makefile.kbuild | 7 ++++++-
README | 4 ++++
distributed-arp-table.c | 28 ++++++++++++++++++++++++++++
distributed-arp-table.h | 34 +++++++++++++++++++++++++---------
hard-interface.c | 2 ++
originator.c | 2 ++
send.c | 2 --
soft-interface.c | 19 +++----------------
types.h | 4 ++++
9 files changed, 74 insertions(+), 28 deletions(-)
Comments
On Friday, November 25, 2011 06:21:19 Antonio Quartulli wrote:
> /*
> - * dat_addr_t is the type used for all DHT indexes. If it is changed,
> - * DAT_ADDR_MAX is changed as well.
> - *
> - * *Please be careful: dat_addr_t must be UNSIGNED*
> - */
> +* dat_addr_t is the type used for all DHT indexes. If it is changed,
> +* DAT_ADDR_MAX is changed as well.
> +*
> +* *Please be careful: dat_addr_t must be UNSIGNED*
> +*/
> #define dat_addr_t uint16_t
> #define DAT_ADDR_MAX biggest_unsigned_int(dat_addr_t)
>
> #define ARP_HW_SRC(skb) ((uint8_t *)(skb->data) + sizeof(struct ethhdr) +
> \ - sizeof(struct arphdr))
> + sizeof(struct arphdr))
> #define ARP_IP_SRC(skb) (*(uint32_t *)(ARP_HW_SRC(skb) + ETH_ALEN))
> #define ARP_HW_DST(skb) (ARP_HW_SRC(skb) + ETH_ALEN + 4)
> #define ARP_IP_DST(skb) (*(uint32_t *)(ARP_HW_SRC(skb) + ETH_ALEN * 2 +
> 4))
> +
> bool arp_snoop_outgoing_request(struct bat_priv *bat_priv,
> - struct sk_buff *skb);
> + struct sk_buff *skb);
> bool arp_snoop_incoming_request(struct bat_priv *bat_priv,
> - struct sk_buff *skb);
> + struct sk_buff *skb);
> bool arp_snoop_outgoing_reply(struct bat_priv *bat_priv, struct sk_buff
> *skb); bool arp_snoop_incoming_reply(struct bat_priv *bat_priv, struct
> sk_buff *skb); bool arp_drop_broadcast_packet(struct bat_priv *bat_priv,
> - struct forw_packet *forw_packet);
> + struct forw_packet *forw_packet);
This looks like a couple of spacing fixes that do not belong here ...
Regards,
Marek
@@ -18,6 +18,9 @@
# 02110-1301, USA
#
+# uncomment the following line to enable the related feature
+# Distributed ARP Table:
+# CONFIG_BATMAN_ADV_DAT=y
# openwrt integration
@@ -27,6 +30,8 @@ endif
# ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
+ccflags-$(CONFIG_BATMAN_ADV_DAT) += -DCONFIG_BATMAN_ADV_DAT
+
ifneq ($(REVISION),)
ccflags-y += -DSOURCE_VERSION=\"$(REVISION)\"
endif
@@ -36,7 +41,7 @@ batman-adv-y += bat_debugfs.o
batman-adv-y += bat_iv_ogm.o
batman-adv-y += bat_sysfs.o
batman-adv-y += bitarray.o
-batman-adv-y += distributed-arp-table.o
+batman-adv-$(CONFIG_BATMAN_ADV_DAT) += distributed-arp-table.o
batman-adv-y += gateway_client.o
batman-adv-y += gateway_common.o
batman-adv-y += hard-interface.o
@@ -26,6 +26,10 @@ it. If you work on a backport, feel free to contact us. :-)
COMPILE
-------
+Before compiling you want to have a look at the Makefile.kbuild
+file to enable/disable wanted features. Actually there are:
+- CONFIG_BATMAN_ADV_DAT enables the Distributed ARP Table
+
To compile against your currently installed kernel, just type:
# make
@@ -23,15 +23,19 @@
#include <linux/if_arp.h>
/* needed to use arp_tbl */
#include <net/arp.h>
+#include <linux/inetdevice.h>
#include "main.h"
#include "distributed-arp-table.h"
#include "hard-interface.h"
#include "originator.h"
#include "send.h"
+#include "soft-interface.h"
#include "types.h"
#include "unicast.h"
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+
static inline void bat_dbg_arp(struct bat_priv *bat_priv,
struct sk_buff *skb, uint16_t type) {
char buf[30];
@@ -48,6 +52,12 @@ static inline void bat_dbg_arp(struct bat_priv *bat_priv,
ARP_HW_DST(skb), &ARP_IP_DST(skb));
}
+#else
+
+#define bat_dbg_arp(...)
+
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
/* Given a key, selects the candidates which the DHT message has to be sent to.
* An originator O is selected if and only if its DHT_ID value is one of three
* closest values (but not greater) then the hash value of the key.
@@ -465,3 +475,21 @@ bool arp_drop_broadcast_packet(struct bat_priv *bat_priv,
}
return false;
}
+
+void arp_change_timeout(struct net_device *soft_iface, const char *name)
+{
+ struct in_device *in_dev = in_dev_get(soft_iface);
+ if (!in_dev) {
+ pr_err("Unable to set ARP parameters for the batman interface "
+ "'%s'\n", name);
+ return;
+ }
+
+ /* Introduce a delay in the ARP state-machine transactions. Entries
+ * will be kept in the ARP table for the default time multiplied by 4 */
+ in_dev->arp_parms->base_reachable_time *= ARP_TIMEOUT_FACTOR;
+ in_dev->arp_parms->gc_staletime *= ARP_TIMEOUT_FACTOR;
+ in_dev->arp_parms->reachable_time *= ARP_TIMEOUT_FACTOR;
+
+ in_dev_put(in_dev);
+}
@@ -22,36 +22,52 @@
#ifndef _NET_BATMAN_ADV_ARP_H_
#define _NET_BATMAN_ADV_ARP_H_
+#ifdef CONFIG_BATMAN_ADV_DAT
+
#include "main.h"
#include <linux/if_arp.h>
+#include <linux/netdevice.h>
struct bat_priv;
struct forw_packet;
/*
- * dat_addr_t is the type used for all DHT indexes. If it is changed,
- * DAT_ADDR_MAX is changed as well.
- *
- * *Please be careful: dat_addr_t must be UNSIGNED*
- */
+* dat_addr_t is the type used for all DHT indexes. If it is changed,
+* DAT_ADDR_MAX is changed as well.
+*
+* *Please be careful: dat_addr_t must be UNSIGNED*
+*/
#define dat_addr_t uint16_t
#define DAT_ADDR_MAX biggest_unsigned_int(dat_addr_t)
#define ARP_HW_SRC(skb) ((uint8_t *)(skb->data) + sizeof(struct ethhdr) + \
- sizeof(struct arphdr))
+ sizeof(struct arphdr))
#define ARP_IP_SRC(skb) (*(uint32_t *)(ARP_HW_SRC(skb) + ETH_ALEN))
#define ARP_HW_DST(skb) (ARP_HW_SRC(skb) + ETH_ALEN + 4)
#define ARP_IP_DST(skb) (*(uint32_t *)(ARP_HW_SRC(skb) + ETH_ALEN * 2 + 4))
+
bool arp_snoop_outgoing_request(struct bat_priv *bat_priv,
- struct sk_buff *skb);
+ struct sk_buff *skb);
bool arp_snoop_incoming_request(struct bat_priv *bat_priv,
- struct sk_buff *skb);
+ struct sk_buff *skb);
bool arp_snoop_outgoing_reply(struct bat_priv *bat_priv, struct sk_buff *skb);
bool arp_snoop_incoming_reply(struct bat_priv *bat_priv, struct sk_buff *skb);
bool arp_drop_broadcast_packet(struct bat_priv *bat_priv,
- struct forw_packet *forw_packet);
+ struct forw_packet *forw_packet);
+void arp_change_timeout(struct net_device *soft_iface, const char *name);
+
+#else
+
+#define arp_snoop_outgoing_request(...) (0)
+#define arp_snoop_incoming_request(...) (0)
+#define arp_snoop_outgoing_reply(...)
+#define arp_snoop_incoming_reply(...)
+#define arp_drop_broadcast_packet(...) (0)
+#define arp_change_timeout(...)
+
+#endif /* CONFIG_BATMAN_ADV_DAT */
/* hash function to choose an entry in a hash table of given size */
/* hash algorithm from http://en.wikipedia.org/wiki/Hash_table */
@@ -118,9 +118,11 @@ static void primary_if_update_addr(struct bat_priv *bat_priv)
if (!primary_if)
goto out;
+#ifdef CONFIG_BATMAN_ADV_DAT
bat_priv->dht_hash = (dat_addr_t)
choose_orig(primary_if->net_dev->dev_addr,
DAT_ADDR_MAX);
+#endif
vis_packet = (struct vis_packet *)
bat_priv->my_vis_info->skb_packet->data;
@@ -224,7 +224,9 @@ struct orig_node *get_orig_node(struct bat_priv *bat_priv, const uint8_t *addr)
orig_node->tt_poss_change = false;
orig_node->bat_priv = bat_priv;
memcpy(orig_node->orig, addr, ETH_ALEN);
+#ifdef CONFIG_BATMAN_ADV_DAT
orig_node->dht_hash = (dat_addr_t)choose_orig(addr, DAT_ADDR_MAX);
+#endif
orig_node->router = NULL;
orig_node->tt_crc = 0;
atomic_set(&orig_node->last_ttvn, 0);
@@ -31,8 +31,6 @@
#include "originator.h"
#include "bat_ogm.h"
-#include <net/arp.h>
-
static void send_outstanding_bcast_packet(struct work_struct *work);
/* send out an already prepared packet to the given address via the
@@ -36,7 +36,6 @@
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
-#include <linux/inetdevice.h>
#include "unicast.h"
@@ -826,7 +825,6 @@ static void interface_setup(struct net_device *dev)
struct net_device *softif_create(const char *name)
{
struct net_device *soft_iface;
- struct in_device *in_dev;
struct bat_priv *bat_priv;
int ret;
@@ -842,20 +840,7 @@ struct net_device *softif_create(const char *name)
goto free_soft_iface;
}
- in_dev = in_dev_get(soft_iface);
- if (!in_dev) {
- pr_err("Unable to set ARP parameters for the batman interface "
- "'%s'\n", name);
- goto free_soft_iface;
- }
-
- /* Introduce a delay in the ARP state-machine transactions. Entries
- * will be kept in the ARP table for the default time multiplied by 4 */
- in_dev->arp_parms->base_reachable_time *= ARP_TIMEOUT_FACTOR;
- in_dev->arp_parms->gc_staletime *= ARP_TIMEOUT_FACTOR;
- in_dev->arp_parms->reachable_time *= ARP_TIMEOUT_FACTOR;
-
- in_dev_put(in_dev);
+ arp_change_timeout(soft_iface, name);
bat_priv = netdev_priv(soft_iface);
@@ -886,7 +871,9 @@ struct net_device *softif_create(const char *name)
bat_priv->primary_if = NULL;
bat_priv->num_ifaces = 0;
+#ifdef CONFIG_BATMAN_ADV_DAT
bat_priv->dht_hash = 0;
+#endif
ret = sysfs_add_meshif(soft_iface);
if (ret < 0)
@@ -68,7 +68,9 @@ struct hard_iface {
struct orig_node {
uint8_t orig[ETH_ALEN];
uint8_t primary_addr[ETH_ALEN];
+#ifdef CONFIG_BATMAN_ADV_DAT
dat_addr_t dht_hash;
+#endif
struct neigh_node __rcu *router; /* rcu protected pointer */
unsigned long *bcast_own;
uint8_t *bcast_own_sum;
@@ -207,7 +209,9 @@ struct bat_priv {
struct gw_node __rcu *curr_gw; /* rcu protected pointer */
atomic_t gw_reselect;
struct hard_iface __rcu *primary_if; /* rcu protected pointer */
+#ifdef CONFIG_BATMAN_ADV_DAT
dat_addr_t dht_hash;
+#endif
struct vis_info *my_vis_info;
};