batman-adv: Disable CONFIG_BATMAN_ADV_DEBUGFS by default

Message ID 20180318093429.18752-1-sven@narfation.org (mailing list archive)
State Accepted, archived
Commit 6f542489678248cc99131f2856158bd2c3989368
Delegated to: Sven Eckelmann
Headers
Series batman-adv: Disable CONFIG_BATMAN_ADV_DEBUGFS by default |

Commit Message

Sven Eckelmann March 18, 2018, 9:34 a.m. UTC
  All tools which were known to the batman-adv development team are
supporting the batman-adv netlink interface since a while. Also debugfs is
not supported for batman-adv interfaces in any non-default netns. Thus
disabling CONFIG_BATMAN_ADV_DEBUGFS by default should not cause problems on
most systems. It is still possible to enable it in case it is still
required in a specific setup.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Was already submitted as RFC in https://patchwork.open-mesh.org/patch/16498/
---
 Makefile               | 2 +-
 README.external.rst    | 2 +-
 gen-compat-autoconf.sh | 2 +-
 net/batman-adv/Kconfig | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)
  

Comments

Linus Lüssing March 18, 2018, 2:39 p.m. UTC | #1
On Sun, Mar 18, 2018 at 10:34:29AM +0100, Sven Eckelmann wrote:
> All tools which were known to the batman-adv development team are
> supporting the batman-adv netlink interface since a while. Also debugfs is
> not supported for batman-adv interfaces in any non-default netns. Thus
> disabling CONFIG_BATMAN_ADV_DEBUGFS by default should not cause problems on
> most systems. It is still possible to enable it in case it is still
> required in a specific setup.

I'm wondering, could this lead to some confusion if package
maintainers of a Linux distro were upgrading the kernel before
upgrading batctl?

Since this patch is not urgent, would it make sentence to delay
this patch for after the next release maybe? That should give
maintainers at least a two months window to upgrade batctl.

And should avoid users being confused of "batctl dc" or
"batctl mf" not working with the batman-adv version their
distro might already ship.

Cheers, Linus
  
Sven Eckelmann March 18, 2018, 6:48 p.m. UTC | #2
On Sonntag, 18. März 2018 15:39:07 CET Linus Lüssing wrote:
[...]
> Since this patch is not urgent, would it make sentence to delay
> this patch for after the next release maybe? That should give
> maintainers at least a two months window to upgrade batctl.

Ok

Kind regards,
	Sven
  
Sven Eckelmann April 25, 2018, 5:17 p.m. UTC | #3
On Sonntag, 18. März 2018 15:39:07 CEST Linus Lüssing wrote:
> Since this patch is not urgent, would it make sentence to delay
> this patch for after the next release maybe?

Patch was now added as 6f5424896782 [1].

Kind regards,
	Sven

[1] https://git.open-mesh.org/batman-adv.git/commit/6f542489678248cc99131f2856158bd2c3989368
  

Patch

diff --git a/Makefile b/Makefile
index fe97d0aa..de607ad9 100644
--- a/Makefile
+++ b/Makefile
@@ -18,7 +18,7 @@ 
 
 # read README.external for more information about the configuration
 # batman-adv DebugFS entries:
-export CONFIG_BATMAN_ADV_DEBUGFS=y
+export CONFIG_BATMAN_ADV_DEBUGFS=n
 # B.A.T.M.A.N. debugging:
 export CONFIG_BATMAN_ADV_DEBUG=n
 # B.A.T.M.A.N. bridge loop avoidance:
diff --git a/README.external.rst b/README.external.rst
index 6379b4f5..4a2e9f6a 100644
--- a/README.external.rst
+++ b/README.external.rst
@@ -43,7 +43,7 @@  option  can be set to to y (enabled), n (disabled) or m (build as
 module).  Available  options  and  their    possible   values are
 (default marked with an "*")
 
- * ``CONFIG_BATMAN_ADV_DEBUGFS=[y*|n]`` (B.A.T.M.A.N. debugfs entries)
+ * ``CONFIG_BATMAN_ADV_DEBUGFS=[y|n*]`` (B.A.T.M.A.N. debugfs entries)
  * ``CONFIG_BATMAN_ADV_DEBUG=[y|n*]`` (B.A.T.M.A.N. debugging)
  * ``CONFIG_BATMAN_ADV_BLA=[y*|n]`` (B.A.T.M.A.N. bridge loop avoidance)
  * ``CONFIG_BATMAN_ADV_DAT=[y*|n]`` (B.A.T.M.A.N. Distributed ARP Table)
diff --git a/gen-compat-autoconf.sh b/gen-compat-autoconf.sh
index 5a4cdefc..071b6ccf 100755
--- a/gen-compat-autoconf.sh
+++ b/gen-compat-autoconf.sh
@@ -52,7 +52,7 @@  gen_config() {
 }
 
 # write config variables
-gen_config 'CONFIG_BATMAN_ADV_DEBUGFS' ${CONFIG_BATMAN_ADV_DEBUGFS:="y"} >> "${TMP}"
+gen_config 'CONFIG_BATMAN_ADV_DEBUGFS' ${CONFIG_BATMAN_ADV_DEBUGFS:="n"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_DEBUG' ${CONFIG_BATMAN_ADV_DEBUG:="n"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_BLA' ${CONFIG_BATMAN_ADV_BLA:="y"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_DAT' ${CONFIG_BATMAN_ADV_DAT:="y"} >> "${TMP}"
diff --git a/net/batman-adv/Kconfig b/net/batman-adv/Kconfig
index e4e2e02b..bee034a9 100644
--- a/net/batman-adv/Kconfig
+++ b/net/batman-adv/Kconfig
@@ -94,13 +94,13 @@  config BATMAN_ADV_DEBUGFS
 	bool "batman-adv debugfs entries"
 	depends on BATMAN_ADV
 	depends on DEBUG_FS
-	default y
+	default n
 	help
 	  Enable this to export routing related debug tables via debugfs.
 	  The information for each soft-interface and used hard-interface can be
 	  found under batman_adv/
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config BATMAN_ADV_DEBUG
 	bool "B.A.T.M.A.N. debugging"